Automotive Acoustic Products (Overview)
Automotive Acoustic Insulation Products By Genesisacoustics.co.za:
Spectrum, Spectrum Sludge, Luxury Liner, Luxury Liner Pro, Damplifier Pro, Thermal Block, Heat Wave Pro, OverKill Pro
Spectrum is a water-based acrylic coating, engineered to absorb resonant energy and reduce the
transmission of airborne noise in passenger vehicles. Spectrum can be used as an interior coating,
or as an exterior undercoating to reduce road, engine and exhaust noise as well as provide a seamless
barrier against moisture, helping to prevent rust.
Spectrum should be used as an exterior undercoating and inside the car as an interior coating.
Spectrum will only adhere to metal, and should not be applied to plastic or upholstery.
Spectrum Sludge is a two part acrylic paste, engineered to absorb resonant energy and reduce the
transmission of airborne noise in passenger vehicles. Spectrum Sludge can be used as an interior
coating, or as an exterior undercoating to reduce road, engine and exhaust noise as well as provide a
seamless barrier against moisture, helping to prevent rust. It is the thickest water based vibration paste
on the market.
Spectrum Sludge should be used as an exterior undercoating and inside the car as an interior coating. Firewall Sludge is specifically designed to adhere to metal, and should not be applied to plastic or upholstery.
Luxury Liner / Luxury Liner Pro
Luxury Liner is a two part composite mat consisting of a vinyl barrier laminated to an open celled
acoustical foam. Luxury Liner is designed to reflect and reject specific airborne sound waves associated
with Road, engine and exhaust noise. For best results, apply Luxury Liner on top of a vibration damper
like Damplifier Pro or Spectrum. Always apply Luxury Liner to the interior of the cars cabin with the vinyl
side showing. Best results are obtained when applied on top of a vibration damper such as Damplifier,
Damplifier Pro, or Spectrum and Firewall coatings.
Damplifier Pro is our premier vibration damping mat. It is a self-adhesive vibration mat used to reduce
resonance and structure borne noise on automotive sheet metal. With a foil heat shield and a total
thickness of 2mm, this butyl damper has the highest heat rating on the market; over 500 degrees
Fahrenheit. Use Damplifier Pro to help insure a cool and quiet ride by killing road, engine and exhaust
drone while saving money, time and energy.
Recommedned installation locations include: doors, trunk, floor, ceiling, firewall and hood.
Thermal Block is a self adhesive mat, designed to face the heat source directly to reflect radiant heat and
dissipate convectional heat up to 800 degrees f.
This composite heat shield has 3 layers of heat rejecting material for the ultimate in automotive thermal
insulation. Apply on the engine side of the firewall, or under the car, above the exhaust for the ultimate in
pre-cabin heat treatment.
Heat Wave Pro
Heat Wave Pro has a reinforced foil face laminated to both sides for extra thermal protection. The extra layer
of foil insures the most heat reduction and insulation available from any product of its type. This thermal-
acoustic barrier is perfect for reducing heat and noise generated from vehicle engines and exhaust
OverKill Pro is a very lexible OEM style foam made of closed cell vinyl infused with rubber, specifically
engineered to absorb airborne noise in your doors between the frequency range of 15k Hz and 20k Hz.
Contact us about this product
| Back to Automotive
| Back to Homepage